Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Problem Solvers Handlebar Clamp Shim
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
KMC MissingLink Connector
$1.20
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
RockShox Maxle Lite Through-Axle
$55.00 - $60.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
Problem Solvers Cross Clamp
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Delta Stem Raiser
$37.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
RockShox Maxle Ultimate Front Thru-Axle
$65.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Problem Solvers ReMatch Adapter 1.1
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
Surly Monkey Nuts
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Sunlite Dog Leash
$41.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
SRAM Power Link Chain Connector
$17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
Giant Connect SL S-Bend Carbon Aerobar Extensions
$122.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
SRAM PowerLock Chain Connector
$17.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Problem Solvers I-Spec II Shifter Clamp
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
Sunlite Chromoly Quill Stem Extender
$14.95
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$7.95
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Wolf Tooth Components ReMote Sustain
$99.95
Wolf Tooth ReMote Sustain is a cable actuated lever for Reverb Stealth dropper seatposts. Featuring the same ergonomics as the standard ReMote 1x lever, the Remote Sustain is an ideal upgrade to plunger-style Reverb remotes. - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
Problem Solvers Micro-Adjustable Headset Spacer
$24.99
The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.
Sunlite Crown Race 27mm
$1.99
- Crown Race - Size: 27.0mm
Problem Solvers Double Chainring Bolts Dual Hex Head - 8mm
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Sunlite Steel Seat Clamp
$3.99
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
Wolf Tooth Components Seatpost Clamp
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Syncros Plasma 6 Arm Pad Brackets
$119.99
Constructed from carbon fiber for ultimate weight savings, our pad holders are left- and right-specific. - Lightweight design - Carbon fiber
Syncros Plasma 6 Clamp
$99.99
The clamp links the Blade to the Extensions and pad holders.
Sunlite Steel Seat Quick Release
$7.99
• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip
Origin8 Expander Wedge & Bolt
$5.99 - $6.99
Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes
DVO ProRate Rear Shock Spring
$130.00
The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders, or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions
Thomson X4 Stem Replacement Clamps
$9.95
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X4 stems
Problem Solvers Braze-On Front Derailleur Adapter
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
Problem Solvers SpaceOut Set
$7.99
The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.
Redshift Sports Replacement Hardware Kit For Dual-Position Seatpost
$9.99
This kit includes all of the parts needed to replace the saddle clamp hardware on your Dual-Position Seatpost. What's in the Box: - Qty. 1 35mm Saddle Clamp Bolt (Front) - Qty. 1 30mm Saddle Clamp Bolt (Rear) - Qty. 2 Round Saddle Clamp Nuts - Qty. 2 Spherical Washers
FSA Headset Compression Plug
$11.99 - $12.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
RockShox Maxle Stealth Front Thru-Axle
$26.00 - $42.00
The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
FSA Flowtron Dropper Seatpost Remote Lever
$56.00
The FSA Flowtron Dropper Seatpost Remote is designed for use with dropbars. - Unique dropbar remote lever
Sunlite QR Seat Clamp
$10.95
• Aluminum • CNC-finished
Sunlite Stainless Steel Button Head Bolts
$7.99 - $9.99
- Stainless steel button head bolts - Sold in bags of 10
Wheels Manufacturing Inc. Derailleur Hanger 377
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For use with M12x1.0 Thru Axle - Fastener not Included - Replaces 3T SKU # 30167 Compatible with the following 3T models: - Strada - 2017+ - Strada Due - 2018+ - Strada Pro - 2018+
Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Wheels Manufacturing Inc. Derailleur Hanger 20
$27.00
All Wheels Manufacturing hangers are produced in their Colorado shop to exacting tolerances using the finest US-made aerospace quality aluminum. - CNC-machined 6061 aluminum - Black anodized finish - Mounting hardware included
Wheels Manufacturing Inc. Derailleur Hanger 158
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x4 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 343
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh part #99-45-0057 - Attaches to frame with (1) M8 chainbolt (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Problem Solvers Universal Derailleur Hanger
$19.99
The Problem Solvers Universal Derailleur Hanger is a handy thing to keep on hand (and even bring on epic off-road rides or extended tours) because it makes it relatively easy to fix a damaged/bent derailleur hanger, which is a pretty common breakdown. This CNC-machined 6061-aluminum hanger takes the place of the drive-side quick-release nut providing a straight hanger to mount your derailleur to. You'll still be able to shift into many of your gears, too.
Zipp Carbon Headset Spacer Set
$27.00
Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.
Problem Solvers Head Tube Reducers
$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
Wheels Manufacturing Inc. Derailleur Hanger 162
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Extended Hanger
$32.00
Wheels Mfg Extended Hanger lengthens your existing hanger 21mm to provide clearance for larger rear cogs. Fits all standard mount hangers! - 42T max rear cog in a 1x setup - 40T max cog with Shimano or Campagnolo standard mount derailleurs or SRAM derailleur when used with a double or triple ring crankset - 36T max when used with Campagnolo crankset - CNC machined 6061 aluminum - Includes steel fixing bolt - Red anodized finish
Origin8 Quill Adapter
$24.39 - $26.79
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
Origin8 Alloy Headset Spacers
$13.99
Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag
Sunlite Alloy Seatpost Shims
$9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sunlite Handlebar Shims
$5.99
- Alloy construction - Great for Cruiser or BMX bar conversions
DVO IGUS Bushing Rear Shock Mount Hardware Kit
$10.00
A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)
Origin8 Disc Washer
$4.99
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
SRAM Chainring Bolt Kit Red Quarq
$27.00
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
Problem Solvers Double Chainring Bolts - 8mm
$9.99 - $19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Problem Solvers Backstop
$19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Problem Solvers BB30/Press-Fit 30 Adapter Kit
$49.99
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
Page 1 of 17 Next page